OEM/ODM Manufacturer Oil Cooling Unit - Water-cooled Low Temperature Industrial Chiller – Hero-Tech

Short Description:

General Description HTLT-A air cooled low temperature industrial chiller is widely applied in small-medium scale low temperature industrial cooling, such as chemical industry, pharmacy, food industry, etc. Water cooled industrial chiller works with a cooling tower. It requires less installation room, and could be located in a relevant close space. Design features -Water temperature range -35ºC to 20ºC. -Danfoss/Copeland scroll compressor. -For temperature below -15℃, semi-hermetic pis...

Send email to us Download as PDF +86 15920056387

Product Detail

packing and transport

certificate

faq

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for , , , As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.

OEM/ODM Manufacturer Oil Cooling Unit - Water-cooled Low Temperature Industrial Chiller – Hero-Tech Detail:

General Description

HTLT-A air cooled low temperature industrial chiller is widely applied in small-medium scale low temperature industrial cooling, such as chemical industry, pharmacy, food industry, etc.

Water cooled industrial chiller works with a cooling tower. It requires less installation room, and could be located in a relevant close space.

Design features

-Water temperature range -35ºC to 20ºC.

-Danfoss/Copeland scroll compressor.

-For temperature below -15℃, semi-hermetic piston type compressor will be adopted.

-Shell and tube evaporator, plate type for option.

-Shell and tube condenser.

-Microcomputer control system offering accurate temperature stability within ±1ºC.
-Large flow volume centrifugal pump, higher pressure available on request.
-Multi-protection devices to make sure the chiller and the equipment running safety.
-Schneider electrical components.
-Danfoss/Emerson thermal components.

Unit Safety Protection

-Compressor inner protection
-Over current protection
-High/low pressure protection
-Over temperature protection
-Flow switch
-Phase sequence/phase missing protection
-Low coolant level protection
-Anti freezing protection
-Exhaust overheat protection

Product detail pictures:

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for OEM/ODM Manufacturer Oil Cooling Unit - Water-cooled Low Temperature Industrial Chiller – Hero-Tech, The product will supply to all over the world, such as: Botswana, Swedish, Cyprus, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.

Packing shipment

certificate

Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
1)   Cooling capacity;
2)   If you don’t know, you can offer the flow rate to your machine, temperature in and temperature out from your using part;
3)   Environment temperature;
4)   Refrigerant type, R22, R407c or other, pls clarify;
5)   Voltage;
6)   Application industry;
7)   Pump flow and pressure requirements;
8)   Any other special requirements.

Q2: How to ensure your product with good quality?
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system. We use the worldwide famous brand accessories, such as DANFOSS, COPELAND, SANYO, BITZER, HANBELL compressors, Schneider electrical components, DANFOSS/EMERSON refrigeration components.
The units will be fully tested before package and The packing will be carefully checked.

Q3: What’s the warranty?
A3: 1 year warranty for all parts; Whole life labor free!

Q4: Are you a manufacturer?
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers’ design.

Q5: How can I place an order?
A5: Send us enquiry via email: sales@szhero-tech.com, call us via Cel number +86 15920056387 directly.

1000ton Screw Chiller